12 / 24 Volt Electric Water Valve Kit
They key is simplicity. I make my products easy to install and easy to use.
*Mount the switch, connect Red wire to power, Black wire to earth, install valve into heater hose circuit and your completed.
*Choice of chrome or black switch.
*Includes 5amp Fuse & Holder.
*Switch has a bi-colour halo ring. Blue (cold) when valve is CLOSED, Red (hot) when valve is OPEN.
Loving the fact that it will operate from 12-24volts.
The valve is simple to mount.
The entire unit only needs 2 wires (+ & -) connected.
Very low amperage draw 0.07A @24v
1.2m of cable between switch and valve.
*16mm bezel optional*
They key is simplicity. I make my products easy to install and easy to use.
*Mount the switch, connect Red wire to power, Black wire to earth, install valve into heater hose circuit and your completed.
*Choice of chrome or black switch.
*Includes 5amp Fuse & Holder.
*Switch has a bi-colour halo ring. Blue (cold) when valve is CLOSED, Red (hot) when valve is OPEN.
Loving the fact that it will operate from 12-24volts.
The valve is simple to mount.
The entire unit only needs 2 wires (+ & -) connected.
Very low amperage draw 0.07A @24v
1.2m of cable between switch and valve.
*16mm bezel optional*
They key is simplicity. I make my products easy to install and easy to use.
*Mount the switch, connect Red wire to power, Black wire to earth, install valve into heater hose circuit and your completed.
*Choice of chrome or black switch.
*Includes 5amp Fuse & Holder.
*Switch has a bi-colour halo ring. Blue (cold) when valve is CLOSED, Red (hot) when valve is OPEN.
Loving the fact that it will operate from 12-24volts.
The valve is simple to mount.
The entire unit only needs 2 wires (+ & -) connected.
Very low amperage draw 0.07A @24v
1.2m of cable between switch and valve.
*16mm bezel optional*