2x Ford Barra rear block dowels.
Replace those pesky gearbox locating dowels that often get crushed bent and deformed out of place.
Ours are made from bearing steel bushing which is a very hard durable steel resistant to crush.
Sold as a pair (2)
What they are
• 2x hollow steel dowels pressed into the block, at about 10 o'clock and 4 o'clock around the crank. The bellhousing / auto adapter plate sits over them.
• They centre the gearbox input shaft to the crank centreline. If they are worn, missing, or the block/bellhousing is off, you get clutch shudder, input bearing wear, and on autos - cracked flexplates, front pump / converter wear.
Check out my other items for Barra items including other dowels used in the engine.
2x Ford Barra rear block dowels.
Replace those pesky gearbox locating dowels that often get crushed bent and deformed out of place.
Ours are made from bearing steel bushing which is a very hard durable steel resistant to crush.
Sold as a pair (2)
What they are
• 2x hollow steel dowels pressed into the block, at about 10 o'clock and 4 o'clock around the crank. The bellhousing / auto adapter plate sits over them.
• They centre the gearbox input shaft to the crank centreline. If they are worn, missing, or the block/bellhousing is off, you get clutch shudder, input bearing wear, and on autos - cracked flexplates, front pump / converter wear.
Check out my other items for Barra items including other dowels used in the engine.
